Filters & Heaters

Best Filter for a 10 Gallon Tank

TankAndFin is reader-supported. If you buy through our links we may earn a commission at no extra cost to you. As an Amazon Associate we earn from qualifying purchases. Disclosure.

Short versionFor most 10 gallon tanks, a hang-on-back filter is the easy choice. Fluval rates the AC20 for 5 to 20 gallons at up to 100 GPH, and Tetra lists the Whisper IQ 10 at 105 GPH. That works out to about 10 turnovers an hour on 10 gallons, well past Habitattitude's "several times each hour." For a betta or shrimp, a sponge filter on a small air pump makes far less current. If there's no room behind the tank, an internal filter such as Tetra's Whisper internal (85 GPH) clips inside the glass.

A 10 gallon is one of the most common first tanks, and the filter that came in the kit isn't always the one people keep. Below are filters rated for that size, compared by the flow each maker lists and the turnover that works out to. Flow figures are maker ratings, not our measurements.

How much flow a 10 gallon needs

Habitattitude, the aquarium program backed by the U.S. Fish and Wildlife Service, says an effective pump "will circulate your entire tank's volume several times each hour." Keep in mind that a rating is the most a filter moves with nothing slowing it. Fluval shows the gap on its canister filters: the 207 lists 206 GPH of pump output but 121 GPH of circulation with media loaded.

The exception is bettas. The University of Florida says they prefer calm water and that "heavy filtration may actually be harmful." For a betta, a sponge filter or a filter you can turn down is the better match.

Your real volume is also a little under 10 gallons. Aqueon lists its standard 10 gallon at 20 1/4 x 10 1/2 x 12 9/16 inches outside, and glass, substrate and the gap below the rim all take up room. Our volume calculator works out the real number.

10 gallon filters compared

FilterTypeMaker's tank ratingRated flowTurnovers per hour on 10 galMedia
Fluval AC20Hang-on-back5 to 20 gal100 GPH10Foam, carbon, BioMax, intake sponge
Tetra Whisper IQ 10Hang-on-backUp to 10 gal105 GPH10.5Bio-Bag cartridge
Marineland Penguin 100Hang-on-backUp to 15 gal100 GPH10Cartridge plus rotating Bio-Wheel
Tetra Whisper internalInternal5 to 10 gal85 GPH8.5Bio-Bag cartridge with carbon
Fluval U1InternalUp to 15 gal65 GPH6.5Foam pad, BioMax
AQUANEAT double spongeAir-driven spongeUp to 20 galSet by your air pumpNot ratedTwo sponges

Fluval figures come from Fluval's AC Series and U Series pages; the others come from the Amazon listings. Turnovers are our arithmetic: rated flow divided by 10 gallons. Real turnover will be lower once media is in and the water line sits below the rim.

Which type suits which tank

  • A community tank of small fish: a hang-on-back filter. All three here list at least 100 GPH, and the media sits in a box on the back where it's easy to reach.
  • A betta, shrimp or fry: a sponge filter. AQUANEAT's listing says it "produces minimal current and has almost no way to suck the fish through the filter." It needs an air pump; see aquarium air pumps.
  • No space behind the tank: an internal filter. Tetra's listing says its Whisper internal clips inside the glass so the tank can sit 1 inch from the wall. Fluval's listing says the U1 can lie on its side for shallow water or stand upright against the glass.

Cartridges or reusable media

Tetra's Whisper filters use Bio-Bag cartridges that the listing says to change monthly. Fluval's AC Series uses separate foam, carbon and BioMax inserts, and Fluval says changing one at a time keeps bacteria levels stable. Either way, don't swap everything at once on an established tank; the beneficial bacteria live in that media. Our water change guide covers filter care.

The filters

Fluval AC20

The smallest of Fluval's AC Series (formerly AquaClear), rated for 5 to 20 gallons at up to 100 US GPH and 7W. Fluval lists foam, carbon, BioMax and an intake sponge in the box.

Fluval AC20 Power Filter
5 to 20 gal, 100 GPH

Fluval AC20 Power Filter

  • Hang-on-back filter for 5 to 20 US gallons
  • Up to 100 US GPH (Fluval)
  • Foam, carbon, BioMax and intake sponge included
Check price on Amazon

Tetra Whisper IQ 10

Tetra lists 105 GPH for tanks up to 10 gallons, a sound shield for running under 40 dB, and a submerged motor that starts without priming.

Tetra Whisper IQ 10 Power Filter
Up to 10 gal, 105 GPH

Tetra Whisper IQ 10 Power Filter

  • Hang-on-back filter for tanks up to 10 gallons
  • 105 GPH; self priming
  • Uses medium Bio-Bag cartridges, changed monthly
Check price on Amazon

Marineland Penguin 100

Rated for up to 15 gallons at 100 GPH. Marineland's rotating Bio-Wheel sits in the outflow for what the listing calls "wet/dry biological filtration."

Marineland Penguin 100 Bio-Wheel Filter
Up to 15 gal, 100 GPH

Marineland Penguin 100 Bio-Wheel Filter

  • Hang-on-back filter for tanks up to 15 gallons
  • 100 GPH
  • Rotating Bio-Wheel for biological filtration
Check price on Amazon

Tetra Whisper internal filter

An 85 GPH filter for 5 to 10 gallon tanks that clips to the inside of the glass, with an adjustable clip for high or low water levels.

Tetra Whisper Internal Power Filter, 10 gal
5 to 10 gal, 85 GPH

Tetra Whisper Internal Power Filter, 10 gal

  • Internal filter for 5 to 10 gallon tanks
  • 85 GPH
  • Clips inside the glass; tank can sit 1 inch from the wall
Check price on Amazon

Fluval U1

Fluval rates the U1 at 65 US GPH for tanks up to 15 gallons, with a foam pad and BioMax included. It can also serve as a second filter in a larger tank.

Fluval U1 Underwater Filter
Up to 15 gal, 65 GPH

Fluval U1 Underwater Filter

  • Internal filter for tanks up to 15 gallons
  • 65 US GPH (Fluval)
  • Foam pad and BioMax included
Check price on Amazon

AQUANEAT double sponge filter

A four pack of air-driven double sponge filters, rated for tanks up to 20 gallons. They arrive vacuum packed, and AQUANEAT says to soak them in warm water for 8 to 10 hours before use.

AQUANEAT Double Bio Sponge Filter (4 pack)
Up to 20 gal, 4 pack

AQUANEAT Double Bio Sponge Filter (4 pack)

  • Listing recommends it for tanks up to 20 gallons
  • Air-driven; mechanical and biological filtration
  • Arrives compressed; soak before use
Check price on Amazon

More on filter types for bigger tanks is in aquarium filters, and sponge filters explains how air-driven filters work. Whatever you pick, cycle it before adding fish; see how to cycle a fish tank.

FAQ

What GPH filter do I need for a 10 gallon tank?

Habitattitude says a filter should circulate the tank's whole volume several times each hour. The hang-on-back filters here are rated at 100 to 105 GPH, about 10 turnovers an hour on 10 gallons before media and a lower water line slow them down. For bettas, go gentler: the University of Florida says heavy filtration may be harmful to them.

Is a sponge filter enough for a 10 gallon tank?

AQUANEAT rates its double sponge filter for tanks up to 20 gallons. It gives mechanical and biological filtration, needs a separate air pump, and makes little current, which is why the listing names bettas, shrimp and fry. It has no chemical stage such as carbon.

How often do I change a 10 gallon filter cartridge?

Tetra says to change Whisper Bio-Bag cartridges monthly. Fluval's AC Series uses separate media inserts, and Fluval says to change one at a time so bacteria levels stay stable.

Can a 10 gallon tank use a filter rated for 20 gallons?

Yes, as long as the flow suits your fish. Fluval rates the AC20 for 5 to 20 gallons, so a 10 gallon sits in the middle of its range. For bettas, which prefer calm water per UF, pick a gentler filter or a sponge filter.

Sources

  1. Habitattitude: Tanks, equipment, maintenance
  2. Fluval: AC Series power filters
  3. Fluval: U1 underwater filter
  4. Fluval: 07 Series canister filters
  5. Aqueon: Aquarium sizing information (PDF)
  6. UF/IFAS: Evolution, culture, and care for Betta splendens (FA212)