Betta Heaters for 1 to 15 Gallon Tanks

TankAndFin is reader-supported. If you buy through our links we may earn a commission at no extra cost to you. As an Amazon Associate we earn from qualifying purchases. Disclosure.
Bettas are tropical fish, and RSPCA Australia says normal room temperature is "generally too cold" for them and can swing through the day. A small heater fixes that. Small tanks make it harder, though: there's little room for the heater and little water to soften a mistake. This guide covers heaters rated for tanks of 15 gallons or less, using each maker's own tank rating. Product details come from the makers and the Amazon listings, and we haven't tested these heaters. For sizing by tank in general, including 20 gallons and up, see aquarium heaters.
What temperature a betta needs
Sources agree that bettas need warm, steady water. They differ a little on the exact range:
- RSPCA Australia: 24 to 26°C (about 75 to 79°F), held with "a submersible aquarium heater," which it calls "the only way to achieve and maintain a constant and appropriate temperature."
- Aqueon: "keep the temperature between 76° and 85° F," and use a heater if the room is below 76°F.
- University of Florida: bettas "thrive in warmer water and do not do well in cold water."
A heater set or preset to 76 to 78°F falls inside both the RSPCA and the Aqueon range.
Small heaters by rated tank size
| Heater | Watts | Maker's tank rating | Watts per gallon at the top of the rating | Temperature control |
|---|---|---|---|---|
| Fluval P10 | 10W | Up to 3 gal | 3.3 | Preset, 76 to 78°F |
| Aqueon Mini Heater | 10W | 2.5 to 5 gal | 2 | No setting listed |
| hygger 10W | 10W | 1 to 5 gal | 2 | Adjustable, 59 to 93°F |
| hygger Mini 20W | 20W | 1 to 5 gal | 4 | Adjustable, 59 to 93°F |
| hygger 25W | 25W | 5 to 10 gal | 2.5 | Adjustable, 59 to 93°F |
| Tetra HT 50W | 50W | 2 to 10 gal | 5 | Holds 78°F |
| Fluval P50 | 50W | Up to 15 gal | 3.3 | Preset, 76 to 78°F |
Tank ratings come from Fluval's P Series page and the Amazon listings. The watts per gallon column is our arithmetic: the heater's watts divided by the largest tank it's rated for. A lower number leaves less spare heat for a cold room. Fluval's own rule for its preset heaters: if the room is more than 12°F (8°C) below the preset range, use a higher wattage heater.
Preset or adjustable?
Preset heaters have no dial. Fluval lists 76 to 78°F for every P Series model, and Tetra says its HT keeps the water at 78°F with no adjustment needed. You can't bump them out of range by accident, and you also can't raise the temperature if a vet or another species calls for it.
Adjustable heaters with an outside controller, like the hygger models, show the water temperature on a display and let you pick a set point from 59 to 93°F. hygger's listings say the heaters stop heating above 95°F or when the water drops below the minimum level, and show an error code when they do.
Safety in a small tank
- Keep it under water. hygger tells owners to keep the heating element fully submerged, and its controllers cut power at low water. Small tanks lose water to evaporation quickly, so top them up often.
- Unplug before water changes. hygger says to unplug the heater and let it cool for 15 minutes before a water change or cleaning. Aqueon's guidance for its heaters is 30 minutes; its drip loop and install steps are in our heater guide.
- Skip the bowl lamp. RSPCA says lamps sold with some bowls give heat that "may be either insufficient or excessive."
- Check with a thermometer. A separate thermometer tells you whether a preset heater is holding its range in your room.
The heaters
Fluval P10 and P50
Fluval's P Series heaters have a shatterproof polymer housing, a lamp that shows when they're running, and suction cups. The P10 is rated for up to 3 US gallons and the P50 for up to 15. Fluval also makes a P25 for up to 6 gallons; only a few were left on Amazon in October 2026, so we left it out.
Fluval P10 Preset Aquarium Heater
- 10W, for nano tanks up to 3 gallons
- Preset to hold 76 to 78°F; no dial
- Shatterproof polymer housing, LED running light
Fluval P50 Preset Aquarium Heater
- 50W, for tanks up to 15 gallons
- Preset to hold 76 to 78°F
- Shatterproof polymer housing, LED running light
hygger 10W, 20W mini and 25W
hygger's small heaters run from an outside controller with a digital display. The 10W and 25W are sizes of one model; the 20W mini is a separate design with a heating element about 4 inches long.
hygger Mini Betta Heater (10W)
- Listed as 10W for 1-5 gallon tanks
- 59-93°F range; external digital controller
- Stops heating above 95°F or if water level drops
hygger Mini Submersible Heater, 20W
- 20W, for 1 to 5 gallon tanks
- Outside controller with display, set 59 to 93°F
- Shuts off at low water or overheating, with an error alarm
hygger Small Aquarium Heater, 25W
- 25W, for 5 to 10 gallon tanks
- Outside controller with display, set 59 to 93°F
- Stops heating above 95°F or at low water
Tetra HT 50W
Tetra's listing says the HT holds 78°F on its own, with a light that shows red while heating and green once the water is at temperature, and that it shuts off if it detects an electrical short. Tetra rates it for 2 to 10 gallon tanks with hoods or glass canopies.
Tetra HT Submersible Heater, 50W
- For 2 to 10 gallon tanks with hoods or glass canopies
- Holds 78°F automatically; no adjustment
- Light shows red while heating, green at temperature
Aqueon Mini Heater
A flat 10W heater for 2.5 to 5 gallon desktop tanks, with a thermal safety shut-off. Neither the Amazon listing nor PetSmart's product page says what temperature it holds, so pair it with a thermometer.
Aqueon Mini Heater, 10W
- Flat 10W heater for 2.5 to 5 gallon desktop tanks
- Thermal safety shut-off
- No temperature setting listed; use a thermometer
A thermometer
A digital thermometer with a probe reads the water while the display stays dry outside the tank.
AQUANEAT Digital Aquarium Thermometer
- Submersible probe with LCD display (listing)
- Accuracy ±1°C
- Battery included
For the rest of the setup, betta fish tanks covers size and gentle filtration, and betta fish food compares what to feed.
FAQ
What size heater does a betta need?
Match the heater to your tank's volume using the maker's rating. Fluval rates its 10W P10 for up to 3 gallons and its 50W P50 for up to 15; hygger rates its 10W for 1 to 5 gallons and its 25W for 5 to 10. In a cold room, size up: Fluval says to use a higher wattage if the room is more than 12°F below the heater's preset range.
What temperature should a betta tank be?
RSPCA Australia recommends 24 to 26°C, about 75 to 79°F. Aqueon says 76 to 85°F. A preset heater that holds 76 to 78°F sits inside both ranges.
Is a preset heater OK for a betta?
Yes, if its preset falls inside a betta's range and it is rated for your tank. Fluval's P Series holds 76 to 78°F and Tetra's HT holds 78°F. Check the water with a thermometer, because a preset heater can't be turned up if the room runs cold.
Does a betta in a bowl need a heater?
RSPCA Australia says heating is essential for bettas, that small bowls are usually too small to fit a suitable heater, and that lamps sold with some bowls don't hold a steady temperature. It recommends a tank of ideally 20 litres (about 5 gallons) or more.